Suraksha Tile Adhesive
Suraksha Gold Tile Adhesive for simple application a single component cement based polymer adhesive for fixing of multiple range of tiles and natural stones in new constructions or to complete re-tiling. It can be easily applied over large areads with a notched trowel. Then the tiles can be adjusted gently after laying to produce a uniform adhesive bed. Advanced premium adhesive are so easy to mix and install that good results are consistently achieved. Irrespective of the tile material or the substrate. The tile Adhesive can be custim mixed for the partivular tile type and substrate. It is formulated accoding to specific applications such as to lay tiles, Glass mosiacs, large size ranite to lay tiles on polished substrates, on dry wall system, on external areas and many more.
Application Scope
Cement plaster, concrete, block wall, fiber cement board, gypsum plaster, gypsum boards.
Area of usage
For fixing a variety of tiles (Glazed and unglazed ceramic, porcelain, mosaic, vitrified tiles etc) on horizontal and vertical masonry or tiles surface in interior and exteriors. When fixing natural stones and heavy tiles on vertical surfaces the use of multipurpose polymer is mandatory.
Advantages
- Fast and efficient ready to use mixtures
- Easy to use, Only need to blend with water
- Can be grouted within 24 hours without waiting for the moisture to evaporate
- Application on existing tiles, many special substrates like polished cement, dry wall system, etc.
- Minimise shrinkage cracks-tile fixing from any corner -Good shock resistance
- Low water absorption
Application Procedure
- Surface to be tiled must be clean, free from contamination and in saturated surface dry condition
- Mix tile Adhesive into water until a lump free mortar consistency is achieved
- Around 6 ltr of portable water is required for a 20 kg bag tile Adhesive. Use slow speed stirrer to get uniform lump free consistency
- Apply tile Adhesive on the wall or floor using trowel at a thicknesses of 3-6 mm and comb with notch trowel. Do not spread in more than 1 sq.m of area at a time
- Take your trowel and spread the adhesive on the wall keeping to one side of the vertical and horizontal guideline
- Do not cover or go over the guidelines as it needs to be visible
- Angle the trowel, apply some adhesive to wall and then spread using the trowel
- Leave adequate & desirable joints between tiles by using spacers
- Clean off excessive adhesive between the joints and on tiles with a damp cloth
